As a softgel capsule brand or a pharma vendor, you must be aware of the softgel manufacturing process.
The manufacturing process goes through several steps such as heating, rolling, drying and filling, with quality checks implied at every step. Let’s understand what the process involves as we go through important points like manufacturing steps, machinery, quality and standards.
Softgel manufacturing is the industrial method of sealing a liquid, oil, or paste inside a soft gelatin shell. Two thin ribbons of gelatin are formed, filled and joined in one step. This is how the production of softgel capsules produces a smooth capsule with a sealed seam and an exact dose.
Every softgel has two parts. The outer shell is made from gelatin, a plasticiser, and purified water. The inner fill carries the active ingredient. It may be dissolved, suspended, or mixed into oil.
Softgels suit both medicines and supplements. Pharmaceutical companies use them for oil-soluble drugs and low-dose actives. Nutraceutical brands use them for vitamins, minerals, fish oil, and herbal extracts such as ashwagandha. Vitamin D, vitamin E, omega-3, and evening primrose oil are common examples in Indian pharmacies.
Brands and doctors choose softgels for practical reasons. That is why softgel manufacturing attracts both drug companies and supplement brands.
Softgel capsule ingredients fall into two groups. These are shell materials and fill materials.
The table gives a quick view before we look at each one. Good softgel manufacturing starts with the right softgel capsule ingredients, so each item below needs careful selection.
| Material | Role in the capsule | Common examples |
| Gelatin | Forms the flexible, durable shell | Bovine or porcine gelatin |
| Plasticisers | Keep the shell soft and elastic | Glycerin, sorbitol |
| Purified water | Dissolves gelatin and forms the shell mass | Water meeting pharmacopoeial limits |
| Fill materials | Carry the active ingredient | Oils, vitamins, minerals, herbal extracts, drug actives |
| Other ingredients | Improve look, taste, and stability | Colours, flavours, permitted preservatives |
Gelatin is the base of the shell. It is a protein that melts when warm. It sets into a firm, flexible film when cooled. A good grade gives the capsule enough strength to survive filling, drying, and transport. Gel strength and viscosity must meet set limits. These decide how well the ribbon forms on the machine.
Gelatin alone dries into a hard, brittle film. Glycerin and sorbitol keep the shell soft and elastic. The ratio of plasticiser to gelatin matters a great deal. Too little leads to cracks. Too much leaves the capsules sticky and prone to deformation. Manufacturers adjust this ratio to suit the fill and the storage climate.
Purified water turns dry gelatin and plasticiser into a smooth, workable mass. It must be free from contaminants, because any impurity passes into the shell. Most of this water is removed later during drying. This is why the amount used at the start must be tightly controlled.
The fill is the reason the capsule exists. Common choices include oils and other liquid formulations, vitamins and minerals, herbal extracts, nutraceutical ingredients, and pharmaceutical active ingredients. The fill must not react with the shell. It must also not draw water out of it. Water-rich and strongly acidic fills need special handling, or a different dosage form.
Several small additions complete the formula. Colours give the capsule a clear identity. Flavours improve the taste of chewable products. Preservatives are used only where the rules permit them. Formulation aids such as beeswax or lecithin keep solid particles evenly spread inside the fill.
This is the technical core of the guide. The softgel manufacturing process runs through seven stages. Each stage must be done correctly before the next one begins. The same softgel production process applies whether the product is a medicine or a supplement.
The mixture is stirred at a controlled temperature until it turns smooth and clear. A vacuum removes trapped air. The finished mass is then held warm until the machine needs it.
At the same time, the filling is done.
The ingredients are chosen, weighed carefully and then combined in a vessel. The ingredients are homogenised and deaerated to create uniform particle size and zero air gaps.
This step forms the capsule. Warm gelatin mass flows onto two cooled, rotating drums. There, it sets into two thin ribbons. The ribbons travel to a pair of rotary dies. A pump injects a measured dose of fill between them. The dies then cut, seal, and shape the capsule in one motion. Sealed softgels drop onto a conveyor.
Fresh softgels are still soft and hold a lot of water. They go into a tumble dryer. This dries the surface and prevents the capsules from sticking together.
After tumbling, the capsules are spread on trays. They then move into drying tunnels or drying rooms. Temperature and humidity are controlled for many hours, and sometimes for a day or more. Drying is the longest part of softgel capsule production. The aim is to reach the required moisture level in the shell. This stage gives the capsule its final firmness and its shelf stability.
Each batch is tested for defects. Inspectors and inspection machines look for leaks, deformed shapes, stuck capsules, air bubbles and colour mismatches.
The defective capsules are discarded.
The approved capsules are cleaned in a polishing machine to remove oil and dust. Afterwards, they are counted and packed into bottles or blister packs.
The pack protects the product from light, heat and moisture. It also includes the batch number and expiry date for traceability.
A softgel plant needs special equipment at every stage. The softgel manufacturing machines below are the core of any pharmaceutical softgel manufacturing unit. Each machine has a clear job. Capsule quality depends on how well they work together.
| Machine | Purpose |
| Gelatin Melting Tank | Prepares the gelatin mass |
| Mixing Vessel | Mixes the fill ingredients |
| Vacuum System | Removes trapped air |
| Softgel Encapsulation Machine | Forms and fills softgel capsules |
| Tumble Dryer | Removes initial surface moisture |
| Drying Trays and Tunnels | Complete capsule drying |
| Inspection Machine | Identifies defective capsules |
| Polishing Machine | Cleans and improves capsule appearance |
| Packaging Machine | Packs finished capsules |
Testing at several stages catches problems early and saves material.
It also gives buyers confidence in every batch. Each test below answers a different question about the product. This matters even more in pharmaceutical softgel manufacturing, where every batch must meet a written specification.
Every incoming ingredient is checked before it enters the plant. Only approved lots are released to production.
Capsules are weighed one by one and as a group. This confirms that fill weight and total capsule weight stay within limits. Weight variation is often the first sign that a machine needs adjustment.
This test measures how fast capsules break apart in a set liquid at body temperature. It shows whether the shell will open in time to release the fill. Each product has its own limit. The pharmacopoeia or the product specification sets it.
Weak seals cause leaks. Leaks ruin both the product and the packaging. Capsules are checked by visual review and by simple pressure or absorption methods. A batch with unacceptable leakage is held back for investigation.
The moisture level in the shell must stay in a narrow range. Too much water leaves capsules soft and sticky. It can also allow microbes to grow. Too little makes the shell brittle. Regular testing during and after drying keeps the shell stable.
The assay confirms that each capsule holds the stated amount of active ingredient. Content uniformity shows that this amount is evenly spread across the batch. Both tests are central to dose accuracy.
Softgels are tested for total microbial count and for named organisms. The applicable product specification sets the limits. This protects consumers and shows that the plant keeps good hygiene.
Stability studies store the product at different temperature and humidity conditions over time. The results set the shelf life and the storage instructions on the label.
Makers must follow quality and legal rules. Which ones apply depends on the product. It may be a medicine, a nutraceutical, or a food supplement. Softgel manufacturing for each type follows its own rules. The table gives a summary.
| Standard or regulation | What it covers | Where it applies |
| WHO-GMP guidelines | Good manufacturing practices for premises, people, and processes | Medicines |
| Schedule M | Indian rules for premises, equipment, and quality systems | Medicines made in India |
| ISO standards | Quality management and food safety systems | Medicines and supplements |
| IP, USP, and BP | Test methods and limits for ingredients and finished products | Medicines and some supplements |
| FSSAI regulations | Licensing, labelling, and safety of food products | Nutraceuticals and food supplements |
| Documentation and traceability | Batch records, test reports, and material records | All products |
The rules differ by product type. A softgel sold as a medicine follows drug law and Schedule M. A softgel sold as a supplement follows FSSAI rules. Confirm your product category before you plan production.
A good softgel comes from many small choices made well. The right gelatin ratio, a clean fill, accurate filling, steady drying, and strict testing show in the final capsule. One weak link can cause leaks, brittle shells, or an uneven dose. A careful manufacturing partner protects your product and your name.
Ans. The main softgel manufacturing machines are a melting tank, a mixing vessel, and a vacuum system. A plant also needs an encapsulation machine, dryers, trays and tunnels, an inspection machine, a polishing machine, and a packing machine.
Ans. Yes. Many brands use third-party makers. This saves the cost of building a plant. The brand shares a formula or picks one from the maker. The maker then produces and packs the capsules.
Ans. Fish oil, vitamin E oil, evening primrose oil, flaxseed oil, and many herbal oils are common. Medium-chain triglycerides often carry the active ingredient.
Ans. Stability tests set the shelf life. Many products last about two years. The exact time depends on the formula and the pack.
Ans. Trapped air makes bubbles inside the capsule. These cause weight changes and uneven doses. A vacuum pulls the air out of the fill.
Ans. Schedule M is the part of Indian drug rules on good manufacturing practice. It covers premises, equipment, staff, and quality systems. A revised version now applies to medicine makers.
Trusted by brands for quality and consistency